Hello Guest it is March 28, 2024, 12:10:48 PM

Author Topic: Mache4 Lathe-pmdx411 incremental move problem  (Read 2581 times)

0 Members and 1 Guest are viewing this topic.

Re: Mache4 Lathe-pmdx411 incremental move problem
« Reply #10 on: May 12, 2018, 05:36:12 PM »
Yes, I home the C axis.

Re: Mache4 Lathe-pmdx411 incremental move problem
« Reply #11 on: May 12, 2018, 05:46:55 PM »
Hi RT,
how about having your program cut marks at 10 degrees say, but over two revolutions. I ideally the cuts made during the second revolution would land
on top of the cuts made during the first revolution.

It may give some insight into whats happening.

Craig
'I enjoy sex at 73.....I live at 71 so its not too far to walk.'