Hello Guest it is November 18, 2019, 04:30:30 AM

Author Topic: Mache4 Lathe-pmdx411 incremental move problem  (Read 1099 times)

0 Members and 1 Guest are viewing this topic.

Re: Mache4 Lathe-pmdx411 incremental move problem
« Reply #10 on: May 12, 2018, 05:36:12 PM »
Yes, I home the C axis.

Re: Mache4 Lathe-pmdx411 incremental move problem
« Reply #11 on: May 12, 2018, 05:46:55 PM »
Hi RT,
how about having your program cut marks at 10 degrees say, but over two revolutions. I ideally the cuts made during the second revolution would land
on top of the cuts made during the first revolution.

It may give some insight into whats happening.

Craig
My wife left with my best friend...
     and I miss him!