Hello Guest it is March 29, 2024, 07:52:38 AM

Author Topic: PoKeys57CNC, support for g31.1,g31.2,g31.3  (Read 3783 times)

0 Members and 1 Guest are viewing this topic.

PoKeys57CNC, support for g31.1,g31.2,g31.3
« on: February 20, 2018, 07:17:50 PM »
Does PoKeys57CNC have support for Mach4 Probe1,Probe2,Probe3 for g31.1,g31.2,g31.3?

TIA

RT

Offline NeoTO

*
  •  504 504
    • View Profile
    • PoLabs
Re: PoKeys57CNC, support for g31.1,g31.2,g31.3
« Reply #1 on: February 21, 2018, 01:47:55 PM »
It supports probe with G31 directly. Multiple probe inputs are currently not supported.
www.poscope.com home of PoKeys USB HID, IO, USB, Ethernet controler and PoScope USB PC oscilloscope
Re: PoKeys57CNC, support for g31.1,g31.2,g31.3
« Reply #2 on: February 16, 2021, 06:37:33 PM »
Has support for multiple probes been added yet for the Mach4 plugin?

Thanks,

RT
Re: PoKeys57CNC, support for g31.1,g31.2,g31.3
« Reply #3 on: April 07, 2021, 08:48:11 AM »
I have the same problem... Multiple probes seem not to work. If PoKeys Team read this post’ it would be great to add this feature....
Re: PoKeys57CNC, support for g31.1,g31.2,g31.3
« Reply #4 on: July 05, 2023, 01:47:48 PM »
The issue still exists in 2023. It's a little frustrating when [url https://blog.poscope.com/cnc-tool-setter-with-pokeys-and-mach4/]they'll post an article on how to set up a toolsetter[/url], and you go through all of the instructions, only to realize I can't use my original probe as well as a toolsetter.