Hello Guest it is August 18, 2019, 01:53:06 PM

Author Topic: macro for turret for boxford tcl  (Read 1420 times)

0 Members and 1 Guest are viewing this topic.

Re: macro for turret for boxford tcl
« Reply #10 on: February 20, 2018, 05:38:24 PM »
How do you home the a axis then or how do you reference your tool
Say you left it on tool 6
Next time you use it it would think tool 6 is the master tool (yes or no ) please advise

Offline TPS

*
  •  1,375 1,375
    • View Profile
Re: macro for turret for boxford tcl
« Reply #11 on: February 21, 2018, 01:29:38 AM »
the a axis Needs not to be homed, because it is only doing incremental moves.

to remember the tool (witch is in front when you shut down the machine),

Config -> General Config -> right down Corner ->Tool Selection Pesistent

or just enter the tool number in main Screen by Keyboard.


About your spindle Speed:
do you have some more Information how your spindle is connected to mach3 ?

Thomas
anything is possible, just try it.
if you find some mistakes, in my bad bavarian english,they are yours.