Hello Guest it is September 27, 2020, 02:12:26 PM

Author Topic: Real G93 Gcode anyone  (Read 4562 times)

0 Members and 1 Guest are viewing this topic.

Offline RDR

*
  •  22 22
    • View Profile
Re: Real G93 Gcode anyone
« Reply #30 on: February 05, 2018, 07:59:21 PM »
Hi Mauri
I did some more playing and I have 3 settings for the rotary see attached pic.  I also attached 2 codes I believe that the units/min is what you normally use in mach3 and then let it to the feed rate correction and I also attached the deg/min that may work for you but I'm not sure I think the cam is doing the correction for you instead of the control doing all of the thinking it maybe worth a shot.
Re: Real G93 Gcode anyone
« Reply #31 on: February 06, 2018, 10:46:16 AM »
RDR's first gcode looks plausable...  But there seems to be an extra cone and cylinder.

mauri's one looks odd to me - (atleast it doesn't look like the stl...)


Offline RDR

*
  •  22 22
    • View Profile
Re: Real G93 Gcode anyone
« Reply #32 on: February 06, 2018, 11:36:27 AM »
Hi skunkworks

I'm not sure on Mauri's file.   I don't think he had my stp file yet if you look back he posted that before I sent over the file so that maybe something he drawn up

Offline Mauri

*
  •  309 309
    • View Profile
Re: Real G93 Gcode anyone
« Reply #33 on: February 06, 2018, 02:27:04 PM »
Hi,
G-Code file that I used was sent before RDR sent his.
Here is the shape from Rhino as the file in any 3D format is too big for this forum.
I have also provided the G-Code with madCAM.
So as you can see Mach4 cannot display this and even a simple circle in G-Code on the ToolPath display in its true form.
Regards,
Mauri.
Re: Real G93 Gcode anyone
« Reply #34 on: February 06, 2018, 02:47:05 PM »
that looks better

Offline RDR

*
  •  22 22
    • View Profile
Re: Real G93 Gcode anyone
« Reply #35 on: February 07, 2018, 07:47:28 PM »
https://www.mmsonline.com/columns/programming-feed-rate-in-degrees-per-minute

I Found this site but I am not sure if mach4 hobby can do custom macro B

If so maybe someone can help you with it
Re: Real G93 Gcode anyone
« Reply #36 on: February 07, 2018, 09:02:34 PM »
Hi,
Hobby cannot do custom B but Industrial can.

Craig
My wife left with my best friend...
     and I miss him!