Hello Guest it is June 19, 2019, 05:42:52 PM

Author Topic: Driver watchdog?  (Read 700 times)

0 Members and 1 Guest are viewing this topic.

Offline Davek0974

*
  •  2,539 2,539
    • View Profile
    • DD Metal Products Ltd
Driver watchdog?
« on: January 03, 2018, 05:05:43 AM »
Had an oddity pop up on my plasma table yesterday,

made 5 or 6 cuts perfectly then stopped and screen message said "Driver watchdog triggered"

I just reset and started up again and all was ok, is this a sign of pending trouble or just a blip???
Bridgeport Mill, Mach3 V062, CSMIO-IP/A controller, AC Servo Drives

Offline Tweakie.CNC

*
  • *
  •  7,815 7,815
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: Driver watchdog?
« Reply #1 on: January 03, 2018, 05:15:50 AM »
Hi Dave,

It meant something to Art, many years ago, but it no longer serves any useful purpose. Best to uncheck 'Use Watchdogs' in General Config.

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.

Offline Davek0974

*
  •  2,539 2,539
    • View Profile
    • DD Metal Products Ltd
Re: Driver watchdog?
« Reply #2 on: January 03, 2018, 05:17:02 AM »
Brilliant, thanks
Bridgeport Mill, Mach3 V062, CSMIO-IP/A controller, AC Servo Drives