Hello Guest it is December 06, 2019, 06:41:45 PM

Author Topic: Going Crazy... DoOEMButton() 307 to 332 X Axis to C Axis  (Read 740 times)

0 Members and 1 Guest are viewing this topic.

Going Crazy... DoOEMButton() 307 to 332 X Axis to C Axis
« on: December 18, 2017, 09:28:17 PM »
I am pretty good at scripting but this is driving me crazy?
It should work but I cannot find much written about it

I am trying to add some scripting to the Mach3 Jog Buttons

If condition = True Then
    DoOEMButton(307)
End If

I created a button
Set the Standard Code to 34 Execute Basic Script
Execute Code is as above, even without  the If statement...  just the DoOEMButton(307)
No movement

If I switch the standard code to 307 it works fine but then I cannot check the conditions

Any help is appreciated
Velox 4 Axis Router, Mach3, Windows 7 32 bit
Modified to also be a Plasma / Engraver
with a Dual Chamber Water Table

Some of my work
https://mygarageshop.com/

ScreenSet: SmartScreens for Mach3
https://ngeneyes.com/smartscreen/licensing/