Hello Guest it is July 17, 2024, 07:42:14 PM

Author Topic: Cnc punch with Mach3  (Read 2004 times)

0 Members and 1 Guest are viewing this topic.

Cnc punch with Mach3
« on: October 23, 2017, 10:49:29 AM »
Hi everyone.

I have a retrofitted cnc punch with Mach3,and i have problem running gcode from cnckad cad cam software on mach3.

Any advise about how to run gcodes for punch press on mach3?or how to edit post processor file from cnckad to run on mach3?

Appreciate your help



Sent from my iPhone using Tapatalk

Offline RICH

*
  • *
  •  7,427 7,427
Re: Cnc punch with Mach3
« Reply #1 on: October 23, 2017, 08:20:22 PM »
Never heard of cnckad software nor any post on it in my time on this forum.
From what i found  it integrates into other software packages.
Those other packages probably use a different syntex of gcode than Mach3.
Not sure which post processor even needs to changed.
Think your on your owne for this one unless someone uses it along with similar
cam program and can help you.

RICH