Hello Guest it is March 28, 2024, 11:00:15 AM

Author Topic: Router wont move  (Read 1903 times)

0 Members and 1 Guest are viewing this topic.

Offline Daner

*
  •  32 32
    • View Profile
Router wont move
« on: September 25, 2017, 04:03:02 PM »
I reinstalled mach3 with the lic. and deleted the old user files (maybe still in the recycle bin)

I should have wrot the old pin numbers down but i dident.
I got the pin numbers from the industrial site.

What my problem is I cant get the router to move at all
On the keyboard it shows in the DRO screen that x - Y AND z are moveing withe the proper keys on the keyboard
Jogging tab is On
Im not sure where to look next
The router table is running with the E stop out but No signal to the Gantry
I rebboted still nothing in jog

Any Tips guys?

Thanks

Danny

Offline Daner

*
  •  32 32
    • View Profile
Re: Router wont move
« Reply #1 on: September 25, 2017, 06:26:54 PM »
I ran the driver test and its good.

For some reason I think its somthing to do with the parrelel ports
When i hit update drivers the gantry made a bump noise
sounded like it wanted to go
but still no movement after 10 hrs working on it

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Router wont move
« Reply #2 on: September 25, 2017, 06:28:41 PM »
The most likely issue is that either your port or pin numbers are wrong.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html

Offline Daner

*
  •  32 32
    • View Profile
Re: Router wont move
« Reply #3 on: September 26, 2017, 08:25:22 AM »
Thanks
It was the printer cable
Working now