Hello All,
I am trying to setup my new Interga communications and I am have a very hard time.
I have tried both direct connection and through a router and with both ways I can see the card and read it's data but the card doesn't stay connected to MACH 4. The errors I get are as follows and they just loop every few seconds.
ERROR: Download System Config error
error downloading config data to HiCon. Enable Mach4 to Retry
HiCON Pluggin: 2.01.47, Board: 7766 Serial: 8BBE5D FW: 3.12, FPGA: 7E7B, IP: 10.0.0.3, AdapterIP: 10.0.0.2
Message Type [45433], NO RESPONSE for 2000ms....
ERROR: Signal Config Download Error (CODE =0). Try Reboot Device
If anyone can offer any help, Please let me