Hello Guest it is March 29, 2024, 09:51:23 AM

Author Topic: "Port 1 Pins current State" no lights...  (Read 2258 times)

0 Members and 1 Guest are viewing this topic.

"Port 1 Pins current State" no lights...
« on: July 31, 2017, 09:39:04 AM »
On a fresh install of Mach3, when I open the plasma profile and go to the tab “Diagnostics” there are no lights listed under “Port 1 Pins current State” or “Input Signals current State”

But if I open the Mill Profile and go to the tab “Diagnostics” there are 5 lights listed under “Port 1 Pins current State” and the emergency light is flashing under “Input Signals current State”

Why are there no lights under the Plasma profile?

Offline Tweakie.CNC

*
  • *
  •  9,196 9,196
  • Super Kitty
    • View Profile
Re: "Port 1 Pins current State" no lights...
« Reply #1 on: August 01, 2017, 01:24:02 AM »
The 'Port 1 Pins current State' LED's do not always work as expected and they should be ignored.

The 'Input Signals current State' LED's should always work correctly.

Tweakie.
PEACE