Hello Guest it is July 19, 2024, 10:21:46 AM

Author Topic: Warning in Mach3 with pokeys  (Read 1865 times)

0 Members and 1 Guest are viewing this topic.

Offline Julie

*
  •  18 18
Warning in Mach3 with pokeys
« on: April 24, 2017, 01:35:37 AM »
Hello,

I am using pokeys57cnc.
When Mach 3 is executed, the attached message appears.
There is no problem in operation.
WinXP, win7, win10 are all the same phenomenon.
Firmware update is not helpful.
And there is no problem in Mach4.
Is there a workaround?