Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Julie on April 24, 2017, 01:35:37 AM

Title: Warning in Mach3 with pokeys
Post by: Julie on April 24, 2017, 01:35:37 AM

Hello,

I am using pokeys57cnc.
When Mach 3 is executed, the attached message appears.
There is no problem in operation.
WinXP, win7, win10 are all the same phenomenon.
Firmware update is not helpful.
And there is no problem in Mach4.
Is there a workaround?