Hello Guest it is December 07, 2022, 08:35:48 AM

Author Topic: Ahha driver and Mach 3  (Read 4792 times)

0 Members and 1 Guest are viewing this topic.

Ahha driver and Mach 3
« on: March 19, 2006, 12:23:55 AM »
I decided to upgrade my AHHA retrofit from the Artisan software to the Mach 3 controller mostly because i heard good things about constant velocity with Mach 3.  I have had no luck with getting it up and running.  I'm almost 100% sure that the pin outs I have in the instruction manual and have downloaded from the net are not correct for the driver I have!

Can anyone tell me where to get pinouts for a RC500 12-2?  I have customers waiting on parts and my machine is down until I get the new controller to work.
Re: Ahha driver and Mach 3
« Reply #1 on: March 19, 2006, 08:39:31 AM »
Is it a 37pin on the RC500? If so it should be the same cable...
Fixing problems one post at a time ;)

Re: Ahha driver and Mach 3
« Reply #2 on: March 22, 2008, 01:17:40 AM »
I am trying to do the same thing.  Take an AH HA retrofit and turn it into a Mach based machine.  Any advice, comments, concerns?

Offline bowber

  •  216 216
  • Kirkby Stephen,Cumbria, UK
    • View Profile
Re: Ahha driver and Mach 3
« Reply #3 on: March 23, 2008, 11:33:08 AM »
I can't help with the problem your having but I've already moved my mill from AHHA artisan to Mach3 and I haven't regretted it one bit.