Hey there

When i run mach 3 with my UC300 it quits after 500 lines. But if i choose printer port it will run many more.

http://cncdrive.com/UC300.html

Anyone have a solution on this?

RBE

You need a Mach3 license to run more than 500 lines of Gcode.
(you will be able to see and run all the Gcode in simulation mode but you will not be able to output more than 500 lines of Gcode to a machine).

http://www.machsupport.com/shop/mach3/

Tweakie.