Hi all,
I've been a lurker here for some time and always found what I was looking for. However at present I'm coming up with a problem I cant seem to find an answer to, so hoping someone will point me in the right direction.
I've used Mach3 for a couple years now on a diy router without much problem. However recently I decided to setup a laser diode to it and set it up using m3 & m5. That worked but had to much delay creating burn spots at end points, so I've tried to go with M10P1 & M11P1. M10P1 & M11P1 works much better and no longer have a delay, am able to burn simple line drawings and text engraving. But the problem I have is when I exit Mach3 I persistently receive error 9991 asking me if I want to recover and then a second popup about the application crash asking to send the log to Microsoft. I get this on my cnc control pc (Winxp Pro SP3) and a similar app crash on my CAD PC running Window 7 both have 3.043.066.
I've tried a number of things to resolve, uninstalled all plugins, uninstalled Mach3 completely and reinstalled fresh clean version afer deleting the C:\mach3 folder, Installed older version Mach3 3.043.062, Tried different Output#, Tried different Pin#. The way I've determined it's a problem with M10 & M11 was to take the same file and replace M10P1 & M11P1 with M3 & M5, No error with M3 & M5 but always get it 100% of the time if I switch the code to M10 & M11.
Thanks in advance for anything you can advise.