Hello Guest it is August 18, 2019, 01:50:51 PM

Author Topic: G53 Incremental Block message  (Read 1149 times)

0 Members and 1 Guest are viewing this topic.

G53 Incremental Block message
« on: March 14, 2017, 02:54:02 PM »
When attempting to home all with Machturn I get the following message.
Cannot use G53 Incremental Block GoG53Z0.0000

Set home Z and set home X both work fine.

I am using Machturn 3 with ESS Smoothstepper and CM106

George
One step at a time!
Re: G53 Incremental Block message
« Reply #1 on: March 15, 2017, 01:15:55 PM »
When attempting to home all with Machturn I get the following message.
Cannot use G53 Incremental Block GoG53Z0.0000

Set home Z and set home X both work fine.

I am using Machturn 3 with ESS Smoothstepper and CM106

George

Change mode from Inc to Abs and Home All works fine.

George
One step at a time!