Hello Guest it is October 15, 2019, 05:33:22 AM

Author Topic: Mach3 Turn post processor for Mastercam  (Read 1308 times)

0 Members and 1 Guest are viewing this topic.

Mach3 Turn post processor for Mastercam
« on: March 09, 2017, 11:22:05 AM »
Hi,

This post processor would be fine if you have problems solving the inverted curves with G2 and G3 or solving the code of the thread with G32.
Tested with cnc Lathe MoriSeiki, MastrerCamX4, mach3 turn R3.042.040, can also be used for other version of Mastercam and Mach3 turn.

Easy to install, ideal for inclined bench cnc lathes with turret at the back of the piece.
Send me questions and orders to renatox24@yahoo.es
Price of 30 dollars.

https://www.youtube.com/watch?v=KcqByYxZ0K4&t=58s

Renato Masias