Hello Guest it is March 28, 2024, 10:13:25 PM

Author Topic: PWM Control of Laser  (Read 1817 times)

0 Members and 1 Guest are viewing this topic.

Offline Myk3

*
  •  15 15
    • View Profile
PWM Control of Laser
« on: March 01, 2017, 04:55:37 PM »
I got the laser install working with simple on / off, but now I want to get PWM functions to work.. I don't completely understand how PWM is supposed to be configured, I followed the instructions on the JTEC site to get it configured, but I do not think it is working right.. as when i enter M3 s1 I am still getting a high powered laser.

For some reason I could only upload 4 screenshots.. so i removed them and put everything in google drive and shared them below..

This is all my setting, that i think are required to enable PWM.. Thanks for the help.. Also in its current state the Laser does turn on / off with the M3 / M5 commands from MDI  / gcode, but in gcode i use the M11p and M10p commands to remove the delay..

https://drive.google.com/drive/folders/0B24uz5OgchgLQ0E1T0dla3FPdGM?usp=sharing

Instructions from JTEC..

https://jtechphotonics.com/?page_id=1436

Offline Tweakie.CNC

*
  • *
  •  9,196 9,196
  • Super Kitty
    • View Profile
Re: PWM Control of Laser
« Reply #1 on: March 07, 2017, 05:23:15 AM »
For others that follow, as it is ESS related, this topic is being dealt with on the Warp9 forum http://www.warp9td.com/index.php/kunena/7-general-discussion/6482-pwm-laser-controll

Tweakie.
PEACE