Hello Guest it is July 22, 2019, 08:26:28 AM

Author Topic: motors tuning  (Read 929 times)

0 Members and 1 Guest are viewing this topic.

motors tuning
« on: February 13, 2017, 03:12:44 AM »
HI,l want to use SFU1604-3 model ballscrew with nema 34HS9840 motors.Please tell me steps per,velocity and acceleration.unit is mm.thanks

Online Tweakie.CNC

*
  • *
  •  7,849 7,849
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: motors tuning
« Reply #1 on: February 13, 2017, 03:19:38 AM »
Steps per unit will depend on both the pitch of your ballscrew and the microstepping selected by your motor driver.

There is a calculator here : http://www.machsupport.com/forum/index.php/topic,16315.0.html
And an example here : http://www.machsupport.com/forum/index.php/topic,12512.0.html

Please also refer to your other posting : http://www.machsupport.com/forum/index.php/topic,34160.0.html

Tweakie.


« Last Edit: February 13, 2017, 03:26:32 AM by Tweakie.CNC »
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.