Hello Guest it is October 21, 2021, 04:45:23 AM

Author Topic: X axis won't rebound when homing  (Read 957 times)

0 Members and 1 Guest are viewing this topic.

X axis won't rebound when homing
« on: February 03, 2017, 11:28:15 PM »
My X axis won't back off when homed,  as do the Y and Z . X and Y are homing in the negative direction  and z homing at the top  I'm using a dmm break out board and servos   with a single limit switch on each axis    thanks  Chris