I don’t get this one to work correctly. Using Mach4 3804. I’m only able to get the 4th axis tool path to show correctly if all axis are homed and I zero them in the home position. Tried this with soft limits on and off. If I move to my work piece zero, zero the axis there and then press Regen Toolpath, the tool path window shows only rubbish.
I milled the same file yesterday, so I know it’s working in the machine, will not pass any limits so the problem is not there. Been scratching my head the whole morning. Anybody else that has the same problem. Well you can always select not to generate the toolpath, but then you don’t see where you have milled anyhow.
Noticed that when you press stop, suddenly, the tool path shows correctly.
Pictures attached:
The first one shows how it looks like during milling, when you have succeeded to generate the tool path in the machine zero.
The second one shows when you have pressed stop.
The third one shows when you press Regen tool path in the new work zero.
Well, I’m confused
, anybody that has this one working and can advice about a solution?
Kjell