Hello Guest it is March 28, 2024, 04:18:56 PM

Author Topic: Can I swap an image in a Mach3 screen  (Read 2804 times)

0 Members and 1 Guest are viewing this topic.

Can I swap an image in a Mach3 screen
« on: January 19, 2017, 02:53:33 PM »
Hi All,

is it possible to swap 2 images in a screen depending on a button press so one is shown if the button is on and a different one if the button is off and if so how can it be done?

Thanks for any help.
Pud

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Can I swap an image in a Mach3 screen
« Reply #1 on: January 19, 2017, 06:10:14 PM »
Place a two state image LED on the screen, with a transparent button on top, and have the button script toggle the LED on and off.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html