Author Topic: Can't Fix Stupid Video and File  (Read 4602 times)

0 Members and 1 Guest are viewing this topic.

Offline swassell

  • Active Member
  • Posts: 4
    • View Profile
Can't Fix Stupid Video and File
« on: December 30, 2016, 10:52:45 AM »
Thought I would share the G code for my Can't Fix Stupid wrench. It is made with 3/4" plywood. Also see the link below for a video on the making of it. Enjoy.

https://www.youtube.com/watch?v=WK524IH1saY


Offline Tweakie.CNC

  • Global Moderator
  • *
  • Posts: 7,685
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: Can't Fix Stupid Video and File
« Reply #1 on: December 31, 2016, 02:22:38 AM »
 ;D Thanks for sharing  ;D

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.

Offline tjstamp

  • Active Member
  • Posts: 73
    • View Profile
Re: Can't Fix Stupid Video and File
« Reply #2 on: January 06, 2017, 02:48:49 PM »
what is the board size and where did you "o" at? center lower left.

Offline swassell

  • Active Member
  • Posts: 4
    • View Profile
Re: Can't Fix Stupid Video and File
« Reply #3 on: January 07, 2017, 02:25:33 PM »
It is 3/4" Plywood and the final dimension is 6" x 32.5". The origin is at the lower left. If you want the CamBam file see attached. It has been zipped.

-Steve

Offline tjstamp

  • Active Member
  • Posts: 73
    • View Profile
Re: Can't Fix Stupid Video and File
« Reply #4 on: January 07, 2017, 03:54:38 PM »
thanks for the reply. can't use the file tho. I have BoB-Cad and use Fanuc G-Code. i'll getter done tho. :)

Offline tjstamp

  • Active Member
  • Posts: 73
    • View Profile
Re: Can't Fix Stupid Video and File
« Reply #5 on: February 11, 2017, 07:52:41 AM »
I don't know what I was thinking. I did run your code in Mach 3 and all is well. I just drew it out in Bob-Cad as dxf so the size could be tweaked. thanks.

Offline TOTALLYRC

  • Active Member
  • Posts: 834
    • View Profile
Re: Can't Fix Stupid Video and File
« Reply #6 on: February 12, 2017, 11:42:35 AM »
Don't forget that if you want to change the scale of the Gcode you can just use the scale DROs in Mach3. To double the size of the Gcode you just enter 2 in both the X and Y DROs.


Mike
We never have the time or money to do it right the first time, but we somehow manage to do it twice and then spend the money to get it right.

Offline tjstamp

  • Active Member
  • Posts: 73
    • View Profile
Re: Can't Fix Stupid Video and File
« Reply #7 on: February 12, 2017, 01:03:26 PM »
thanks for the reply. I used that function once but I needed it (DXF) so I could bring it down some. my machine max is only Y-20 X-40.

Offline tjstamp

  • Active Member
  • Posts: 73
    • View Profile
Re: Can't Fix Stupid Video and File
« Reply #8 on: February 12, 2017, 01:27:41 PM »
THIS IS THE DXF I MADE FOR CAN'T FIX STUPID.