Sorry. In the blur between Xmas and New Years this one failed to get my attention.
Please do not rely on the MachSupport forum to reach PMDX for tech support.
We offer support via direct email, telephone, and by our forum here:
http://www.pmdx.com/PMDX-Forums/Your problems likely resulted from using the wrong profile. The PMDX-Sample profile
supports the series of SmartBOBs that directly mimic parallel ports, including using
signal assignments named after the parallel port pins. This series includes the
PMDX-410, 411, 412, 416 and 422.
The PMDX-424 has more I/O than a parallel port and we do not mimic parallel port
signal names with this board, but rather give them names like "Input 1". Trying to
run a PMDX-424 using a parallel port style profile will result in strange things happening
with the Inputs, and Outputs. The motor drivers will mostly work, but even there
special considerations apply because of the support for two drivers for "Motor 3".
If you are still having issues, please contact us on the PMDX forum.
Thanks,
Steve Stallings
www.PMDX.com