Hello Guest it is September 26, 2023, 06:01:48 AM

Author Topic: Problem with Spindle Speed Control  (Read 1265 times)

0 Members and 1 Guest are viewing this topic.

Problem with Spindle Speed Control
« on: June 13, 2016, 06:47:36 AM »
I use Mach3Turn for Lathe with control about 2 printerports. In the diagnosticsmode i can see the indexsignal working, but in the manual or automatic mode the spindlespeed display shows allways zero. I have test this with a low and a high spindlespeed.
Have someone a idea what i made wrong?

Many thanks for your answer


Offline rcaffin

  •  1,052 1,052
    • View Profile
Re: Problem with Spindle Speed Control
« Reply #1 on: June 22, 2016, 01:00:55 AM »
Check pin assignments. You probably have the index signal wrongly assigned. It should work.