Author Topic: Mill wizard demo question  (Read 1499 times)

0 Members and 1 Guest are viewing this topic.

Offline tmccub840840@gmail.com

  • Active Member
  • Posts: 70
    • View Profile
Mill wizard demo question
« on: June 13, 2016, 09:33:26 AM »
I recently purchased and am very happy with the mill wizard for my shop pc that runs mach3. My auestion is does the demo work so i can build a tool table and save to flash drive then bring to shop load new tools?

Offline Ron Ginger

  • Active Member
  • Posts: 921
    • View Profile
Re: Mill wizard demo question
« Reply #1 on: June 13, 2016, 10:30:04 AM »
The  only thing that does not work in demo mode is looking at or saving the gcode. All the other functions work fine, so you should be able to create tool tables or material tables just fine.

Offline tmccub840840@gmail.com

  • Active Member
  • Posts: 70
    • View Profile
Re: Mill wizard demo question
« Reply #2 on: June 13, 2016, 11:18:01 AM »
Thanks Ron! Thats great to know and saves me a little sweat logging them in while at the machine.