Hello Guest it is March 28, 2024, 06:28:50 AM

Author Topic: Auto Zero Script Not Profile Specific  (Read 1906 times)

0 Members and 1 Guest are viewing this topic.

Auto Zero Script Not Profile Specific
« on: April 14, 2016, 03:17:15 PM »
Hi
It appears to me that the same auto zero script loads not matter what profile I use. I have three machines connected to the same PC so I would like to have a separate auto zero setup for each one. When I edit the script in one profile it changes in the others.  I thinking maybe the is tied to the particular screen I am using.  How can I do this?

Thanks
Richard

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Auto Zero Script Not Profile Specific
« Reply #1 on: April 14, 2016, 08:42:40 PM »
If the script is a button script, then yes, it's saved in the screen. Download a screen editor like Screen4, open and save the screen with a new name for each profile.
In Mach3, use View >Load Screen to load the specific screen for each profile. Then edit the macros in each profile.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: Auto Zero Script Not Profile Specific
« Reply #2 on: April 15, 2016, 09:34:18 AM »
Gerry
That solved my problem :)
Thanks