Author Topic: Mach3 Beginner Help  (Read 12515 times)

0 Members and 1 Guest are viewing this topic.

Offline saimkry

  • Holding
  • Posts: 2
    • View Profile
Mach3 Beginner Help
« on: April 12, 2016, 07:04:19 AM »
Hello ,
I have a mill ML3200 it has factory installed Mach3 (in condition as it was bought but was never started until today)
The screen shows only a part of Mach3 program .
I am a beginner on this Mach3 so I am looking forward to learn on.
Any help would be appreciated.

Offline RICH

  • Global Moderator
  • *
  • Posts: 7,301
    • View Profile
Re: Mach3 Beginner Help
« Reply #1 on: April 12, 2016, 07:08:49 AM »
That is custom screen and not the generic one that Mach provides.
Start by having a read .....study .....of the Mach3 Manuals and watching available videos.

RICH

Offline saimkry

  • Holding
  • Posts: 2
    • View Profile
Re: Mach3 Beginner Help
« Reply #2 on: April 12, 2016, 07:11:25 AM »
Hey , I already read all that and I understand but I thought anyone who works with Artivison 2.0 knows my problem.
On other cnc machines it loads well but when It comes to Mills profile it doesnt load right.
ty for the rep anyway.

Offline RICH

  • Global Moderator
  • *
  • Posts: 7,301
    • View Profile
Re: Mach3 Beginner Help
« Reply #3 on: April 12, 2016, 07:16:57 AM »
Sorry but we are not mind readers.  :D So may want to include some info about  specific software, etc when posting.
I know nothing about Artvision.

RICH

Offline Tweakie.CNC

  • Global Moderator
  • *
  • Posts: 7,643
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: Mach3 Beginner Help
« Reply #4 on: April 12, 2016, 08:32:56 AM »
You are missing one or more of the graphics within the MillBitmaps folder. You could try copying the background…jpg and various .jpg’s from the other bitmaps folders into MillBitmaps and see if that resolves the issue.
Alternately contact the suppliers of the machine who are probably the only people who work with Artivision 2.0 (whatever that is).

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.

Offline Christopher

  • Active Member
  • Posts: 8
    • View Profile
Re: Mach3 Beginner Help
« Reply #5 on: July 19, 2016, 01:18:33 AM »
Is this machine a fabric mill or a laser mill because there the only type of mill that I can find with that model number?