Hello Guest it is June 19, 2024, 05:45:59 AM

Author Topic: push to on and release off button  (Read 1948 times)

0 Members and 1 Guest are viewing this topic.

push to on and release off button
« on: April 06, 2016, 02:21:21 PM »
dear all,
I am trying to convert Reverse run button as push to on and release off. so that reverse run will be done only while it is pressed and no need to use Pause button again. I tried code like "while button=1" but cant find exact code. I could only add feed lower along with Reverse Run setoemdro(821,10) dooembutton(279) similerly I added FRO Reset to Cycle Start Button. pl help.
deepak

Offline Chaoticone

*
  • *
  •  5,624 5,624
  • Precision Chaos
Re: push to on and release off button
« Reply #1 on: April 06, 2016, 05:30:50 PM »
VB in Mach3 cannot detect "on release".
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!