Hello Guest it is November 14, 2019, 09:05:23 PM

Author Topic: LazyCam 2.01 Lathe  (Read 4134 times)

0 Members and 1 Guest are viewing this topic.

Re: LazyCam 2.01 Lathe
« Reply #10 on: May 26, 2007, 08:10:08 PM »
Chip thanks for the reply.  I'd tried everything i could think of just looking for a confirmation that it was time to start coding by hand.
Now i'm off to play will Lcam mill and offsets.

Wes
Have a nice Day