Hello Guest it is October 18, 2019, 05:54:43 PM

Author Topic: 2010 screenset- Is there a 'distance to go' display  (Read 3142 times)

0 Members and 1 Guest are viewing this topic.

Offline Dgk

*
  •  2 2
    • View Profile
2010 screenset- Is there a 'distance to go' display
« on: March 13, 2016, 04:05:15 PM »
Just purchased a used cnc machine that is running the 2010 screenset. Does anyone know if there is a Distance to Go display on this sceenset? I really find this display useful.

Thanks.

Offline ger21

*
  • *
  •  6,288 6,288
    • View Profile
    • The CNC Woodworker
Re: 2010 screenset- Is there a 'distance to go' display
« Reply #1 on: March 13, 2016, 04:59:28 PM »
No, there isn't.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html

Offline Dgk

*
  •  2 2
    • View Profile
Re: 2010 screenset- Is there a 'distance to go' display
« Reply #2 on: March 13, 2016, 08:07:31 PM »
Thanks ger21. As I am new to this, is there an advantage to running the 2010 screenset? That is the setup that the machine came with. 

Offline ger21

*
  • *
  •  6,288 6,288
    • View Profile
    • The CNC Woodworker
Re: 2010 screenset- Is there a 'distance to go' display
« Reply #3 on: March 13, 2016, 09:02:38 PM »
It will automatically measure your tools during tool changes, if it's setup properly.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: 2010 screenset- Is there a 'distance to go' display
« Reply #4 on: July 18, 2016, 03:37:22 PM »
No, there isn't.

Any way to put one in there?  There is one on the default screen set so I'm sure it could be added.  Or am I way off here?

Stephen "Highspeed" Kruse

Offline ger21

*
  • *
  •  6,288 6,288
    • View Profile
    • The CNC Woodworker
Re: 2010 screenset- Is there a 'distance to go' display
« Reply #5 on: July 18, 2016, 07:48:10 PM »
It may be as simple as adding a button, but I'm not sure.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html