Hello Guest it is October 14, 2019, 10:17:56 PM

Author Topic: Encoder swap video  (Read 5291 times)

0 Members and 1 Guest are viewing this topic.

Encoder swap video
« on: March 12, 2016, 07:33:44 PM »
Hey guys. I just swapped out the encoders on my Matsuura MC 500 be retrofit. The controller needs a 5v signal and the stock encoders were 12v. Machine works like a champ now.
Re: Encoder swap video
« Reply #1 on: September 10, 2018, 04:51:16 AM »
thanks for the share..will try it later..hope the result will be the same
jetwriters tech writer