Hello Guest it is September 27, 2021, 08:50:04 AM

Author Topic: Get Error when starting probing  (Read 1849 times)

0 Members and 1 Guest are viewing this topic.

Get Error when starting probing
« on: January 14, 2019, 11:03:52 PM »

I'm using Mach3 under windows xp. I have issue when starting probing. In my case my probe is tool 250. I do tool change operation  by doing T250 M6. The tool change mode is activated, I load the probe in the spindle and  continue the operation and finally it confirm tool change completed. I start probing by probing the z height. It starts the operation but nothing move I get the following error : MT Mode Probe Op _MT not mounted. Probe Op Canceled.

Why this error is happening

Thank you

Offline reuelt

  •  487 487
    • View Profile
Re: Get Error when starting probing
« Reply #1 on: April 09, 2019, 12:15:30 AM »
User solved his problem thru another forum
"the gift of God is eternal life through Jesus Christ our Lord"