Hello Guest it is October 17, 2019, 02:53:19 PM

Author Topic: Galil ICM20105  (Read 1308 times)

0 Members and 1 Guest are viewing this topic.

Galil ICM20105
« on: March 05, 2016, 10:51:09 PM »
I have 1 Galil DMC 2183 with 2 ICM20105 cards. 
I've been able to configure my limit switched to work correctly in Mach3.
I have a speed encoder for my spindle RPMs which is wired into the Jaux port on the ICM20105.
I need help configuring the inputs for this in Mach3.