Hello Guest it is June 04, 2020, 05:29:14 AM

Author Topic: Deformed shapes  (Read 1641 times)

0 Members and 1 Guest are viewing this topic.

Deformed shapes
« on: February 10, 2016, 09:26:05 AM »
Hi
I'm Daniel, just registered
I've got Chinese CNC router 2030 using Mach3 software , and still learning how to use it
But I have an issue, that is the reason I have registered my self today.
I use Artcam Express to create shapes, but when I load G codes, (even examples in Mach3 ) and start the router it's engraving deformed shapes, "Y" direction stretched.
Wandering if anyone can help me solve that.
Thanks
Best regards
Re: Deformed shapes
« Reply #1 on: February 10, 2016, 10:04:30 AM »
 :)
Re: Deformed shapes
« Reply #2 on: February 10, 2016, 10:08:13 AM »
 :),
Re: Deformed shapes
« Reply #3 on: February 10, 2016, 10:09:41 AM »
 :) :)
Re: Deformed shapes
« Reply #4 on: February 10, 2016, 10:11:21 AM »
 ;)

Offline ger21

*
  • *
  •  6,280 6,280
    • View Profile
    • The CNC Woodworker
Re: Deformed shapes
« Reply #5 on: February 10, 2016, 10:54:25 AM »
Your steps/unit is probably set wrong for the Y xis.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html

Offline Vogavt

*
  •  258 258
    • View Profile
Re: Deformed shapes
« Reply #6 on: February 10, 2016, 04:12:44 PM »
Go to YouTube and search for axis calibration.

Here's one to get you started

https://www.youtube.com/watch?v=XkO5tc-jSxw

Re: Deformed shapes
« Reply #7 on: February 10, 2016, 06:51:59 PM »
Thanks guys for the useful info.
Best regards.