Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: subbzero on February 10, 2016, 09:26:05 AM

Title: Deformed shapes
Post by: subbzero on February 10, 2016, 09:26:05 AM

Hi
I'm Daniel, just registered
I've got Chinese CNC router 2030 using Mach3 software , and still learning how to use it
But I have an issue, that is the reason I have registered my self today.
I use Artcam Express to create shapes, but when I load G codes, (even examples in Mach3 ) and start the router it's engraving deformed shapes, "Y" direction stretched.
Wandering if anyone can help me solve that.
Thanks
Best regards

Title: Re: Deformed shapes
Post by: subbzero on February 10, 2016, 10:04:30 AM

 :)

Title: Re: Deformed shapes
Post by: subbzero on February 10, 2016, 10:08:13 AM

 :),

Title: Re: Deformed shapes
Post by: subbzero on February 10, 2016, 10:09:41 AM

 :) :)

Title: Re: Deformed shapes
Post by: subbzero on February 10, 2016, 10:11:21 AM

 ;)

Title: Re: Deformed shapes
Post by: ger21 on February 10, 2016, 10:54:25 AM

Your steps/unit is probably set wrong for the Y xis.

Title: Re: Deformed shapes
Post by: Vogavt on February 10, 2016, 04:12:44 PM

Go to YouTube and search for axis calibration.

Here's one to get you started

https://www.youtube.com/watch?v=XkO5tc-jSxw

Title: Re: Deformed shapes
Post by: subbzero on February 10, 2016, 06:51:59 PM

Thanks guys for the useful info.
Best regards.