Hello Guest it is March 28, 2024, 08:16:51 PM

Author Topic: PMDX-424 SmartBOB-IsoUSB now shipping  (Read 4107 times)

0 Members and 1 Guest are viewing this topic.

PMDX-424 SmartBOB-IsoUSB now shipping
« on: January 28, 2016, 10:00:32 PM »
The new PMDX-424 SmartBOB-IsoUSB motion controller for Mach4 is now shipping.

For details see: http://www.pmdx.com/PMDX-424

This new controller builds on the SmartBOB feature set by adding:

Galvanic electrical isolation of the USB interface to avoid ground loops and
improve noise immunity.

Number of general purpose inputs increased to 8, and they are now
opto-isolated.

There is an on board universal power system that accepts 100 to 240 VAC
mains input power, or the alternate version which accepts 12 to 36 volts
DC power. Both versions can power NPN proximity sensors.

Support added for gantry style machines with 5 motors running 4 axes
including future support for gantry squaring.

There is support the PMDX-407 Spindle Controller, motherboards including
the PMDX-133/PMDX-134 and similar future products, and support for the
PMDX-179 external status panel.

Steve Stallings
www.PMDX.com
Steve Stallings
www.PMDX.com