Hey Guys,
I have finally got machine working as I wanted (before I had some problems, which Tweakie was so kind to help me with them)
So, since then I have cut lots of wings (this was the initial idea of the machine), but I had bigger ideas - like cutting letters and different shapes. After some research I decided to buy a product - DevFoam Pro - very good program with nice and intuitive interface and for a good price too. So here are some pics of what I have done for the first time. My garage neighbours loved the capabilities of the program and wanted some signs for their door like " Alchololics here!" and "BAR Cheers", I will post the finished and glued product may be tomorrow
http://imgur.com/LZLMe5z
http://imgur.com/YMRENoe
http://imgur.com/B2LWdjy
http://imgur.com/uCMt2rI
https://youtu.be/_xfYntfSukY

Excellent work, I am pleased to see that your machine is working OK and that you are cutting things related to BEER 

Tweakie.

Oh YES!
Most of my friends are working for beer companies (they are pouring air into bottles)

OK,
the good news is that I can cut polycarbonate sheeting, ropes and foam for mattresses.
Really satisfied by the results, some pics are coming I was pretty busy working on my first and second planes done by the cnc Hope that will be able to post some good maden flights ... soon
The first is a delta wing (a bit modified from the original) and the second is a copy or borjet maja uav http://borjet.com/index.php/prod-engl-men/blog-2-columns which in my opinion is one of the best - like the Volvo - stiff but durable
See Ya soon!

Cool.
The part of the video of the Maja making it's fully automated landing was extremely impressive - I could use the electronics for that 

Tweakie.

Ok,
here is a pic, of the polycarbonate sheeting, rope before and after the cut (small pieces) - perfectly burned and a not that good cut foam letter (I should make a rail or something to move the material when it is being cut, because there is some kind of calamine that stays on the wire and stops the heat).
http://imgur.com/C2R0kDf

Guys,
I tried to cut an egg with my cnc - the result:
- couple of lessons  learned
- 1 hour wasted
- thinking about making a nice motorized platform (my controller is 5 axis)

And by the way, does someone know a soft that I will be able to use, or it will be better to insert lines in the g-code file (as I am doing sometimes)?

http://imgur.com/Rd2Puv2
http://imgur.com/VP7cVDN
http://imgur.com/uCZltPD

Hey Guys,
I am baaack
Last week I was working on a house project and after a couple of bad cuts I finished and was really reager to show You the result.
http://imgur.com/a/Klodd

Nick

Excellent work Nick. 

Tweakie.

Great stuff, have been considering putting together a foam machine like this, just a bit limited on space with my cnc router filling most of my space.    What software do you use to create the shapes and set up the cuts in mach?