Hello Guest it is March 28, 2024, 03:05:46 PM

Author Topic: Micro PC with UC100 to run mach3 with 8.9 inch touch screen  (Read 4558 times)

0 Members and 1 Guest are viewing this topic.

Micro PC with UC100 to run mach3 with 8.9 inch touch screen
« on: January 19, 2016, 12:38:43 AM »
I have been hunting for a small cheap pc to run mach3 off of.
I love this little guy.  The PIPO x9
https://www.youtube.com/edit?o=U&feature=vm&video_id=7swyh3AOCTk

Offline Tweakie.CNC

*
  • *
  •  9,196 9,196
  • Super Kitty
    • View Profile
Re: Micro PC with UC100 to run mach3 with 8.9 inch touch screen
« Reply #1 on: January 19, 2016, 01:43:58 AM »
Looks like an extremely neat solution - if you go for it please let us know how it performs.

Tweakie.
PEACE
Re: Micro PC with UC100 to run mach3 with 8.9 inch touch screen
« Reply #2 on: January 19, 2016, 06:50:22 AM »
Yes, please keep us informed.
Looks too neat to be true.
$150  .... WOW !
Only 18 left.
http://www.amazon.com/TOZO-Computer-1920x1200-Desktop-Windows10/dp/B016NSRD4S

Hope it works out OK, I have a spot for 1 ..... (or 2).

Thanks,
Russ

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Micro PC with UC100 to run mach3 with 8.9 inch touch screen
« Reply #3 on: January 19, 2016, 02:08:01 PM »
Looks good and think it should work fine. I have been using Via Pico mobos on the big lathe and the beaver mill for a few years now and never an issue. The CPU on them is 1Gig and Ram is also 1 Gig. Both machines have SmoothSteppers.

Hood
Re: Micro PC with UC100 to run mach3 with 8.9 inch touch screen
« Reply #4 on: January 19, 2016, 06:48:12 PM »
its been running gcode in the air since yesterday.  X and Y zero back to my gauge.  looks like a great cheap simple controller option. 
Re: Micro PC with UC100 to run mach3 with 8.9 inch touch screen
« Reply #5 on: February 04, 2016, 11:55:33 PM »
Hi fixittt, just wondering how is the Pipo9x going with Mach3 and your machine?, I may be interested in changing over too.

Nick
Re: Micro PC with UC100 to run mach3 with 8.9 inch touch screen
« Reply #6 on: February 05, 2016, 06:00:59 AM »
have not run some serious code with it yet.  Sucks I know.....  But I did use it to make a test video for some screen set changes I made for a 10 tool ATC air collet system.  Used the PIPO for the test so I could get it in the video and the machine at the same time.

https://youtu.be/Ur1ZqFzDQnc