Hello Guest it is March 29, 2024, 01:23:58 AM

Author Topic: GCode window  (Read 1666 times)

0 Members and 1 Guest are viewing this topic.

GCode window
« on: January 17, 2016, 11:00:20 AM »
My Gcode window always has a lot of white space "above" the first line...thought it might be my post processor, but when I look at the text, the code starts on the first line...is there a setting in Mach3 that is contolling this, or is this just the way the GCode window works.

Thanks

Offline stirling

*
  • *
  •  2,188 2,188
  • UK
    • View Profile
    • www.razordance.co.uk
Re: GCode window
« Reply #1 on: January 17, 2016, 11:12:04 AM »
just the way it works. The line to be executed is always half way down so you can see the last few lines and the next few.

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: GCode window
« Reply #2 on: January 17, 2016, 11:37:07 AM »
Yep, on my screen I have 7 blank lines at the top.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html