Hello Guest it is March 29, 2024, 07:52:00 AM

Author Topic: Getting 2 different size cuts on each side of machine  (Read 9829 times)

0 Members and 1 Guest are viewing this topic.

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Getting 2 different size cuts on each side of machine
« Reply #20 on: March 13, 2016, 08:48:03 AM »
Get a tape like this and a USB microscope for about $20 to read it.
http://www.amazon.com/Starrett-SM66W-Adhesive-Graduation-Interval/dp/B004HMDFRM/ref=pd_sim_469_2?ie=UTF8&dpID=51MC%2BHuT1TL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=0BKZVMCS77YKKKKKBYQ9

Should allow you to fairly accurately measure long distances. Not as precise as a $600 precision rule, but close enough for a router.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: Getting 2 different size cuts on each side of machine
« Reply #21 on: January 25, 2017, 12:41:51 PM »
Were you eve able to solve your problem, because I have the same situation. Thanks John