Hello Guest it is November 12, 2019, 06:11:11 PM

Author Topic: Replacing Galil with CSMIO IP-A  (Read 2013 times)

0 Members and 1 Guest are viewing this topic.

Replacing Galil with CSMIO IP-A
« on: December 15, 2015, 03:45:16 AM »
Hey @all,

first sorry for my bad English!!!
Hope you guys can help me out...
As in the subyect written I would like to replace the Galil motion controller with the CSMIO IP-A.
Can you please guide me through the wiring thing???
I do not have any wiring diagram but the machine was working properly.

So my first question is: is it possible that I can take one cable from the ICM and put it in the CSMIO???

Please tell me what information you need to help me out...

ThankĀ“s a lot!


Re: Replacing Galil with CSMIO IP-A
« Reply #1 on: January 05, 2016, 12:42:09 AM »
Hi dingelding ,

With the poor info you have provided it would be difficult for any one to help you our!
Pls provide more technical info, for example:
what type of machine, Axis, type of Motor Drive, application, CNC control, Layout photos, etc.