Hello Guest it is May 26, 2024, 09:16:50 PM

Author Topic: Determing THe X and Y direction of the workpiece so it can be in any direction  (Read 4763 times)

0 Members and 1 Guest are viewing this topic.

Offline BR549

  •  6,965 6,965
    • View Profile
I would just use thestock screenset and find a macro to do the probing for you.

(;-) TP
Probeit from http://www.craftycnc.com/probe-it-wizard-mach3/ has an auto G68 routine, but you will need to buy a probe.