Hello Guest it is September 21, 2019, 01:58:55 PM

Author Topic: Speed of stepper motors  (Read 5527 times)

0 Members and 1 Guest are viewing this topic.

Re: Speed of stepper motors
« Reply #30 on: November 13, 2015, 03:49:25 PM »
Yes.

You need to tune the motors


Those drives you have are not very good... What voltage power supply do you have?

Rob
Rob

Albert Einstein ― “If you can't explain it to a six year old, you don't understand it yourself.”
Re: Speed of stepper motors
« Reply #31 on: November 17, 2015, 12:29:04 PM »
I measure 24.45 V from DC+ to DC- on the drivers.

Offline Fastest1

*
  •  927 927
  • Houston, TX
    • View Profile
Re: Speed of stepper motors
« Reply #32 on: November 27, 2015, 08:52:33 PM »
Yes in the inbox was G80 and I changed it now to F1200

The axes seem to move faster for one step, but if i want to test it for more example 10 steps
the motors start moving and then I get a high sound and the motors stop moving
Could it be that i have now a too high velocity?
 
Johanna


This is called stalling. It can be caused by a few things, one of which is too high of acceleration.
I want to die in my sleep like my grandfather, not like the passengers in the car! :-)