Hello again.
I have study this code but this is not wat I want.
I have now the code working but only nust I create the holes on multiple places
CODE:
(--38mm gat--)
G00 G17 G21 G49 G80 G90 G54 (Safety Block)
(Program the Parameters)
#1 = 1.0 ( Safe Z )
#2 = -0.2 ( Engraving Depth Z )
( Start the Process)
G00 X17.7 Y0 Z1
M03 S8000 M8
G01 Z0 F50 ( Move to Z zero)
M98 P1000 L10 ( Call Sub, loop 10 times)
G00 Z#1
X0 Y0
M30
O1000
G03 X17.7 I0 Z#2 F850
#2=[#2-0.2]
M99
%
Thanks