Hello Guest it is June 16, 2019, 05:35:04 PM

Author Topic: Denford Orac tool changer problem.  (Read 1139 times)

0 Members and 1 Guest are viewing this topic.

Denford Orac tool changer problem.
« on: October 23, 2015, 03:45:26 PM »
Hi all,

I recently acquired a friends Denford Orac lathe which he had converted to run on mach3. Everything seems to work ok apart from the tool changer which once given a command rotates continuously and doesn't stop. I'm not sure if its a soft wear issue ( macro) or a sensor problem. Has anyone had such a problem or at least have an Idea what it could be?

Cheers John.

Offline RICH

*
  • *
  •  7,337 7,337
    • View Profile
Re: Denford Orac tool changer problem.
« Reply #1 on: October 24, 2015, 07:56:23 AM »
What command are you using? By tool changer are you meaning a turret?

RICH
Re: Denford Orac tool changer problem.
« Reply #2 on: October 24, 2015, 02:12:03 PM »
Hi Rich,

The code I input is T0101M6.

John.

Offline RICH

*
  • *
  •  7,337 7,337
    • View Profile
Re: Denford Orac tool changer problem.
« Reply #3 on: October 24, 2015, 06:50:49 PM »
So what is in the M6?

RICH