Hello Guest it is January 25, 2022, 04:08:44 PM

Author Topic: HELP WITH OPTIMUM CNC CONTROLLER VI AND MACH3  (Read 9702 times)

0 Members and 1 Guest are viewing this topic.

Offline Graham Waterworth

*
  • *
  •  2,437 2,437
  • Yorkshire Dales, England
    • View Profile
Re: HELP WITH OPTIMUM CNC CONTROLLER VI AND MACH3
« Reply #10 on: May 12, 2020, 05:55:58 AM »
You can set an enable in Mach to turn the relay on a lot of boards use pin 14 or it could be it needs a chargepump signal.

Some pictures of the board may help us.

Without engineers the world stops
Re: HELP WITH OPTIMUM CNC CONTROLLER VI AND MACH3
« Reply #11 on: May 13, 2020, 10:54:23 PM »
I uploaded pictures in my previous post . i will tap the inputs and inject and verify , will update this post before the weekend thanks