Hello Guest it is March 28, 2024, 06:47:37 PM

Author Topic: Give Away Chicago Area  (Read 8990 times)

0 Members and 1 Guest are viewing this topic.

Give Away Chicago Area
« on: October 01, 2015, 05:50:01 PM »
I need room and I have a converted from a PC board drilling machine base to cnc mill that has X/Y hooked to DC Servo Gecko Drives running Yaskawa Motors. (Toroidal transformer with large Caps)Very large ball screws 30mm dia. plus. I hung a piece of cold rolled plate off of the gantry and have a Z axis,minus the motor the Z axis does have a holder for an 80mm dia spindle.I have the spindle for a hundred, but not the VFD for it any longer. It was running when I took it out of service. I toyed with sprucing it up,or stripping it , but thought if anyone from the area wanted it (McHenry County), they could have it. The table measures 39.39" X 27" and although it is on wheels, it is quite heavy,I'm guessing a little over a  thousand pounds, so it would take a heavy duty trailer to pick it up. I have some pics if you give me an e-mail to send to.
Dave Cooper
Re: Give Away Chicago Area
« Reply #1 on: October 31, 2017, 05:54:32 PM »
Did u give this away already?
Pictures?
Re: Give Away Chicago Area
« Reply #2 on: October 31, 2017, 07:26:42 PM »
I still have it minus the z-axis, I may have enough pieces around to cobble one together though. The spindle is still available. I'll  try to get some pics this weekend.
Coop
Re: Give Away Chicago Area
« Reply #3 on: October 31, 2017, 07:33:26 PM »
It's free right?
Re: Give Away Chicago Area
« Reply #4 on: October 31, 2017, 07:41:18 PM »
Yes, it is on wheels but quite heavy though, would need a trailer with probably a winch or come along.
Re: Give Away Chicago Area
« Reply #5 on: October 31, 2017, 07:47:33 PM »
Please post pictures or pm them to me
Re: Give Away Chicago Area
« Reply #6 on: October 31, 2017, 08:05:57 PM »
I'll  try to post pics tomorrow
Coop