Hello Guest it is March 28, 2024, 09:37:42 PM

Author Topic: G100 servo and stepper  (Read 2535 times)

0 Members and 1 Guest are viewing this topic.

G100 servo and stepper
« on: May 04, 2007, 12:14:49 PM »
Hello,
question about the G100 with mach3.
can i use for example 4 servo-motors and one stepper with this g-rex board?
thanks,
Kris.
Logic takes you from A to B, imagination takes you anywhere
Re: G100 servo and stepper
« Reply #1 on: May 04, 2007, 03:58:04 PM »
Yes, you need to have servo amps that take step and direction .. if you have that you are all set

Thanks
Brian
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com